TM-5-2330-325-13-P
SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-2330-325-13-P - Page 273 of 648
FIELD MAINTENANCE
SLACK ADJUSTER MAINTENANCE
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic’s
(WP 0144, Table 1, Item 16)
Clevis Installation Gage
(WP 0144, Table 1, Item 1)
Gloves, Chemical and Oil Protective
(WP 0144, Table 1, Item 7)
Materials/Parts
Adhesive, Loctite (WP 0143, Table 1, Item 1)
Brush, Scrub (WP 0143, Table 1, Item 5)
Pin, Cotter
Materials/Parts (cont.)
Qty: (2) (WP 0107, Figure 10, Item 2)
Solvent, Cleaning Compound
(WP 0143, Table 1, Item 24)
References
WP 0093
Equipment Condition
Wheels chocked (WP 0005)
WARNING
•
To avoid damage to equipment, make sure brakes are caged prior to performing
maintenance on slack adjusters. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
•
Wear eye protection when removing and installing retaining rings to prevent them
from flying off and hitting your face. Failure to comply may result in death or injury
to personnel. Seek medical attention in the event of an injury.
TM 5-2330-325-13&P
0059
0059-1
Back to Top
