TM-5-2330-325-13-P
SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-2330-325-13-P - Page 277 of 648
INSTALLATION - Continued
3.
Install slack adjuster (Figure 3, Item 6) on camshaft (Figure 3, Item 7).
4.
Install flat washer (Figure 3, Item 8) and retaining ring (Figure 3, Item 9).
NOTE
Turn adjusting screw clockwise to align clevis with air chamber shaft.
5.
Using adjusting screw (Figure 3, Item 5), align clevis (Figure 3, Item 3) with air chamber shaft
(Figure 2, Item 1).
6.
Turn slack adjuster nut (Figure 3, Item 2) counterclockwise to thread onto clevis until handtight.
NOTE
Cotter pin securing slack adjuster to clevis should be installed facing wheel.
7.
Install new cotter pins (Figure 3, Item 4) and clevis pins (Figure 3, Item 10) to slack adjuster clevis
(Figure 3, Item 3) and clevis.
8.
Apply Loctite to threads and tighten jamnut (Figure 3, Item 1).
1
466-0059
2
3
4
5
10
6
8
9
7
Figure 3.
Slack Adjuster Installation.
END OF TASK
TM 5-2330-325-13&P
0059
0059-5
Back to Top
