TM-5-2330-325-13-P

SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-2330-325-13-P - Page 270 of 648

CLEANING - Continued

WARNING

•

Improper cleaning methods and use of unauthorized cleaning solvents may injure

personnel and damage equipment. Failure to comply may result in death or injury

to personnel. Seek medical attention in the event of an injury.

•

Cloths or rags saturated with solvent cleaning compound must be disposed of

using IAW authorized facilities procedures. Failure to comply may result in death or

injury to personnel. Seek medical attention in the event of an injury.

2.

Remove grease and oil with cleaning compound solvent and a rag. Dry thoroughly.

3.

Lubricate (WP 0093).

END OF TASK

INSPECTION

1.

Inspect for damage and condition of splines.

2.

Inspect for rust or corrosion.

3.

Replace defective parts.

END OF TASK

INSTALLATION

1.

Install cam bracket (Figure 3, Item 6) on axle bracket (Figure 3, Item 2) with four new self-tapping screws

(Figure 3, Item 5).

2.

Align new spider seal (Figure 3, Item 9), flat washers (Figure 3, Items 8 and 11), and retaining ring

(Figure 3, Item 7) and install camshaft (Figure 3, Item 10) in axle spider (Figure 3, Item 1) and cam bracket

(Figure 3, Item 6).

3.

Install flat washer (Figure 3, Item 4) on camshaft (Figure 3, Item 10).

4.

Expand retaining ring (Figure 3, Item 3) and install on camshaft (Figure 3, Item 10).

TM 5-2330-325-13&P

0058

0058-4