TM-5-2330-378-14-P

SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1999

TM-5-2330-378-14-P - Page 145 of 524

TIM5-2330-378-14&P

4-31. REARCORNERCLEARANCELIGHTREPLACEMENT(M870).

ThisTaskCovers:

a.

Removal

b.

Installation

Initial Setup:

Tools/Test Equipment:

- Too[ kit, general mechanic's: automotive

- Common no. I too] set (item 6, Appendix B) (Item 7, Appendix B)

NOTE

If replacing lamps only, do steps 1 through 3 only.

a. REMOVAL

WARNING

Disconnect all outside power before performing any maintenance on the electrical

system. Failure to do so could result in serious injury or death.

1 Remove two screws (1), clearance light cover (2), and lens (3) from base plate (4).

2.

Separate clearance light cover (2) from lens (3).

3.

Remove lamp (5) from socket (6).

4.

Pull wire (7), connector (8), and wire (9) through hole in frame (10).

5.

Cut two wires (7 and 9) and remove

connector(8)from

behindframe. Tape

10

wire (7) to frame (10) to keep it from

a

slipping through hole in frame.

4

6

5

3

2

a

10

7

ONT

9

8

4-57