TM-5-2330-378-14-P

SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1999

TM-5-2330-378-14-P - Page 146 of 524

TM 5-2330-378-14&P

4-31.

REAR CORNER CLEARANCE LIGHT REPLACEMENT (M870) (continued).

6.

Remove

rubber

sleeve (11) from wire (7).

7.

Remove four screws (12) and nuts (13) from base plate (4).

8.

Remove base plate (4) from mechanical felt (14).

9.

Remove mechanical felt (14) from frame (10).

b.

INSTALLATION

1.

Put mechanical felt(14) and base plate(4)in place on frame(10).

2.

Thread wire (9) from base plate (4) through hole in mechanical felt (14) and frame (10).

3.

Install four screws (12) and nuts (13) in base plate (4).

4.

Install rubber sleeve (11) on wire (7).

5.

Strip two wires (7 and 9) to depth of connector (8).

6.

Install connector (8) on wire (7) and crimp.

7.

Install connector (8) on wire (9) and crimp.

a.

Push wire (7), connector (8), and wire (9) into holeinframe (10).

9.

Install lamp (5) in socket (6).

10.

Join clearance light cover

10

(2) and lens (3) and install

14

on base plate (4).

13

0

4

111@

Install two screws (1) in

6

5

clearance light cover (2).

10

12

7

ONT

11

9

FOLLOW-ON TASKS:

8

- None

4-58