TM-5-2330-378-14-P
SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1999
TM-5-2330-378-14-P - Page 139 of 524
TM 5-2330-378-14&P
4-29. CLEARANCELIGHTREPLACEMENT(M870).
ThisTaskCovers:
a.
Removal
b.
Installation
Initial Setup:
Toolsrrest Equipment:
Personnel Required:
Two
• Common no. I tool set (Item 6, Appendix B)
• Tool kit, general mechanic's:
automotive
(Item 7, Appendix B)
Materials/Parts:
- Lockwasher (4) (Item 11, appendix 1)
a.
REMOVAL
WARNING
Disconnect all outside power before performing any maintenance on the electrical
system.
Failure to do so could result in serious injury or death.
NOTE
• There are two types of clearance lights found on the M870 semitrailers:
clearance
lights
and clearance
marker lights. This procedure can be used to replace either type.
•
There are seven clearance lights on the semitrailer. Two amber clearance lights are
located on the sides of the gooseneck and two more are located on the sides of the
semitrailer at about the middle.
Three red clearance
light are located on the rear of the
semitrailer.
This procedure describes the replacement of one clearance light.
4-51
Back to Top
