TM-5-2350-262-20-3
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 3 OF 3; HYDRAULIC TROUBLESHOOTING TEST PROCEDURES
TM-5-2350-262-20-3 - Page 54 of 319
3-19
TM 5-2350-262-20-3
NOTE
Have suitable container ready to catch oil.
•
Stop engine; relieve hydraulic pressure.
Disconnect HYDR FLTR-IN-7 hose (1) from
tee (2) at port 7 on hydraulic return line filter (3).
Cap tee (2).
•
While holding open end of hose (1) in container, have assistant start engine.
Check
for free flow of hydraulic oil from hose (1).
•
Stop engine; relieve hydraulic pressure.
Connect hose (1) to tee (2).
Notify Direct Support Maintenance.
OIL FLOW TEST
Back to Top
