TM-5-2350-377-13-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER

JUNE 2012

TM-5-2350-377-13-P - Page 126 of 404

REMOVAL

NOTE

•

Refer to TB 43-0001-39 Series for all wiring harnesses not shown for Repair task.

•

Tag all electrical leads prior to removal for installation.

1.

Remove nut (Figure 1, Item 6), lockwasher (Figure 1, Item 5), flat washer (Figure 1, Item 7), and hose clamp

(Figure 1, Item 8) from headlight wiring harness (Figure 1, Item 2) and apron stud (Figure 1, Item 9). Discard

lockwasher.

2.

Disconnect headlight wiring harness (Figure 1, Item 2) from apron wiring harness (Figure 1, Item 3) at terminals.

3.

Disconnect two headlight wiring harness (Figure 1, Item 2) terminals from two apron mercury switch terminals

(Figure 1, Item 1).

4.

Remove headlight wiring harness from four braces (Figure 1, Item 10) inside apron (Figure 1, Item 4) back

wall.

5.

Remove headlight wiring harness (Figure 1, Item 2) from apron (Figure 1, Item 4).

9

M0089HBF

1

2

3

4

10

8

7

5

6

Figure 1.

Headlight Wiring Harness Removal.

END OF TASK

TM 5-2350-377-13&P

0023

0023-2