REMOVAL - Continued
2.
Remove screw (Figure 2, Item 3) and control box power harness ground terminal (Figure 2, Item 5) from bilge
pump light ground (Figure 2, Item 1).
3.
Install ejector panel (Figure 2, Item 4) to hull with four screws (Figure 2, Item 2) retained from Step (1).
5
M0094HBF
4
1
2
3
Figure 2.
Control Box Power Wiring Harness Removal.
TM 5-2350-377-13&P
0025
0025-2