INSTALLATION
1.
Install control box power harness connector (Figure 5, Item 1) on track and blade control box
(Figure 5, Item 2).
M0097HBF
2
1
Figure 5.
Control Box Power Wiring Harness Installation.
2.
Remove four screws (Figure 6, Item 2) from ejector panel (Figure 6, Item 1) and move panel downward,
retaining screws for future use.
2
M0098HBF
1
Figure 6.
Control Box Power Wiring Harness Installation.
TM 5-2350-377-13&P
0025
0025-4