TM-5-2350-377-13-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER

JUNE 2012

TM-5-2350-377-13-P - Page 202 of 404

REMOVAL - Continued

b.

Remove flow valve (Figure 2, Item 3) from each valve body (Figure 2, Item 4).

CAUTION

Be ready to secure valves located under brackets when removing fastening hardware. Failure

to do so may cause damage to equipment.

2.

Holding valve removal:

a.

Remove two screws (Figure 2, Item 1), four flat washers (Figure 2, Item 2), two lockwashers

(Figure 2, Item 7), nuts (Figure 2, Item 8), and valve bodies (Figure 2, Item 5) from bracket

(Figure 2, Item 6). Discard lockwashers.

b.

Remove valve (Figure 2, Item 10) and check valve (Figure 2, Item 9) from each holding valve body

(Figure 2, Item 5).

M0054HBF

5

6

5

4

3

4

1

1

2

2

7

8

10

9

10

9

7

8

2

Figure 2.

Flow Valves Removal.

END OF TASK

TM 5-2350-377-13&P

0039

0039-2