TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 234 of 790
TM 5--2350--378--24&P
0013 00--9
FRONT CORNER (LEFT OR RIGHT) RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE --
Continued
0013 00
Figure 5. Control Valve Linkage
SPRUNG/UNSPRUNG CONTROL VALVE LINKAGE CHECK
WARNING
Do not operate ejector when personnel are in bowl. Do not work in
bowl unless ejector lock is engaged. Failure to comply may result in
severe injury or death to personnel.
Hold measuring device (Figure 5, item 1) on face of SPRUNG/UNSPRUNG control
valve (Figure 5, item 3). Have assistant move SPRUNG/UNSPRUNG lever between
SPRUNG and UNSPRUNG mode. Measure distance plunger (Figure 5, item 2) travels
as lever is moved. Distance of travel should be 9/32 in. (7 mm).
Back to Top
