TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 350 of 790
TM 5--2350--378--24&P
HYDRAULIC OIL OVERHEATS -- Continued
0016 00
Figure 34. HDC Control Box
EJECTOR RELIEF VALVE TEST
Reset all HDC solenoid valves by selecting the RESET VALVES button (Figure 34,
item 1) on the HDC control box.
WARNING
S
Do not operate ejector when personnel are in bowl. Do not work in
bowl unless ejector lock is engaged. Failure to comply may result in
severe injury or death to personnel.
S
Do not stand or work in bowl area unless ejector lock is engaged.
Do not stand in bowl to observe roller guide travels. Failure to
comply may result in severe injury to personnel.
Move ejector halfway forward.
Stop engine and relieve hydraulic pressure.
Continued on page 0016 00--49.
0016 00--47/48 blank
Back to Top
