TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 596 of 790
TM 5--2350--378--24&P
0035 00--3
REPAIR HDC PRIMARY MANIFOLD -- Continued
0035 00
DISASSEMBLY -- CONTINUED
3.
Remove three transducers (Figure 2, item 7), three o--rings (Figure 2, item 8), and relief valve (Figure 2,
item 5), from primary manifold (Figure 2, item 15). Discard o--ring.
4.
Remove six three--way valves (Figure 2, item 9), six teflon backups (Figure 2, item 13), six o--rings (Figure 2,
item 14), six teflon backups (Figure 2, item 13), six teflon backups (Figure 2, item 11), six o--rings (Figure 2,
item 12), six teflon backups (Figure 2, item 11) and six o--rings (Figure 2, item 10) from primary manifold
(Figure 2, item 15). Discard o--rings and teflon backups.
5.
Remove two NC valves (Figure 2, item 1), two teflon backups (Figure 2, item 3), two o--rings (Figure 2,
item 4), two teflon backups (Figure 2, item 3), and two o--rings (Figure 2, item 2), from primary manifold
(Figure 2, item 15). Discard o--rings and teflon backups.
6.
Remove three NO valves (Figure 2, item 6), three o--rings (Figure 2, item 2), three teflon backups (Figure 2,
item 3), three o--rings (Figure 2, item 4) and three teflon backups (Figure 2, item 3), from primary manifold
(Figure 2, item 15). Discard o--rings and teflon backups.
Figure 2. Removing Transducers and Valves From Primary Manifold
END OF TASK
Back to Top
