TM-5-2350-378-24-P

HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

TM-5-2350-378-24-P - Page 602 of 790

TM 5--2350--378--24&P

0036 00--3

REPLACE VALVE V21 (V22), RELIEF VALVE, AND BYPASS HOSE -- Continued

0036 00

REMOVAL -- CONTINUED

4.

Remove adapter (Figure 2, item 11), two flat washers (Figure 2, item 9), o--ring (Figure 2, item 12), and valve

V21 (Figure 2, item 13) from bulkhead bracket (Figure 2, item 8). Discard o--ring.

5.

Remove adapter (Figure 2, item 6) and o--ring (Figure 2, item 7) from top of valve V21 (Figure 2, item 13),

and valve V21 (Figure 2, item 13) from tee (Figure 2, item 14). Discard o--ring.

6.

Remove bypass hose (Figure 2, item 2) from adapter (Figure 2, item 1).

7.

Remove adapter (Figure 2, item 1) from tee (Figure 2, item 14) and tee (Figure 2, item 14) from adapter

(Figure 2, item 3).

8.

Remove adapter (Figure 2, item 3) and o--ring (Figure 2, item 4) from filter (Figure 2, item 5). Discard o--ring.

Figure 2. Removing Valve V21 (V22), Relief Valve, and Bypass Hose

END OF TASK