TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 606 of 790
TM 5--2350--378--24&P
0037 00--1
REPLACE TRANSDUCER
0037 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0071 00, item 7)
Adapter, Socket Wrench (WP 0071 00, item 1)
Wrench Set, Crowfoot (WP 0071 00, item 11)
Materials/Parts
O--rings (13) (WP 0072 00, item 7)
Dust protective plugs (13) (WP 0070 00, item 5)
Personnel Required
Two 62B10
Equipment Conditions
Vehicle MASTER power OFF (TM 5--2350--262--10)
Hydraulic pressure relieved (WP 0004 00)
Filter guard protective bracket removed for
transducers T3, T4, and T12
(TM 5--2350--262--20--2)
Vehicle hull raised and on jack--stands for
transducers T5 and T6 (TM 5--2350--262--20--1)
Hull access plates removed for transducers T5 and
T6 (TM 5--2350--262--20--1)
Apron locked in full--up position for transducer T7
(TM 5--2350--262--10)
Ejector to front of vehicle for transducer T7
(TM 5--2350--262--10)
REMOVAL
NOTE
All transducers are removed and replaced in the same manner. This task
covers the removal and replacement of only one transducer.
Refer to Table 1. HDC Pressure Transducer Locations for the location of
each pressure transducer.
Tag electrical connector and hydraulic hose/tube to assist in installation.
Plug fitting that transducer is removed from to prevent leakage.
Table 1. HDC Pressure Transducer Locations
Transducer
Location
WP #
T3, T4, T12
Main Hydraulic filter area
WP 0029 00
T5, T8
Right Actuator Access Area
WP 0030 00
T6, T9
Left Actuator Access Area
WP 0030 00
T7
Left Main manifold
WP 0050 00
T1, T2, T13
Primary Manifold
WP 0035 00
T10
Left Forward Manifold
WP 0031 00
T11
Right Forward Manifold
WP 0032 00
Back to Top
