TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 607 of 790
TM 5--2350--378--24&P
0037 00--2
REPLACE TRANSDUCER -- Continued
0037 00
REMOVAL -- CONTINUED
1.
If wiring harness and connector are connected, disconnect transducer connector (Figure 1, item 2) from
wiring harness connector (Figure 1, item 1).
2.
Remove transducer (Figure 1, item 3) from component.
Figure 1. Transducer
END OF TASK
INSTALLATION
1.
Install transducer (Figure 1, item 3) on component.
2.
Connect transducer connector (Figure 1, item 2) to wiring harness connector (Figure 1, item 1).
END OF TASK
END OF WORK PACKAGE
Back to Top
