TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 69 of 738
TM 5-2815-241-34&P
CAM FOLLOWER HOUSING REMOVAL
INITIAL SETUP
Tools
Equipment Condition
Handle, ratchet, 1/2-inch drive
Socket, 9/16-inch, 1/2-inch drive
Accessory drive removed (page 2-43).
ACTION
LOCATION
ITEM
REMARKS
NOTE
Steps given are typical for all three cam follower housings.
1.
Cam follower
housing (1)
Six screws (2) and
six lockwashers (3)
Using 1/2-inch drive 9/16-inch socket and
ratchet handle, unscrew and take out.
Discard lockwashers.
2.
Left side of
cylinder block (4)
Cam follower housing
(1) and gasket (5)
Take off.
TASK ENDS HERE
TA 242368
2-47
Back to Top
