TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 71 of 738
TM 5-2815-241-34&P
GEARCASE
COVER
REMOVAL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CAUTION
When performing step 7, rotate camshaft while removing. Failure to do so may cause
damage to camshaft and camshaft bearings.
Camshaft with gear
(14) and thrust
washer (15)
Pull out.
TASK ENDS HERE
CRANKSHAFT REMOVAL
INITIAL SETUP
Tools
Tools - Continued
Chisel, cold, 1/2-inch
Goggles, safety
Hammer, ball-peen, 16-ounce
Handle, hinged, 3/4-inch drive
Handle, ratchet, 1/2-inch drlve
Screwdriver, flat-tip, 3/8-inch
Socket, 9/16-inch, 1/2-inch drive
Socket, 15/16-inch, 3/4-inch drive
Socket, 1 1/2-inch, 3/4-inch drive
TA 242369
2-49
Back to Top
