INSTRUMENTS
MOTOR
TRUCK SERVICE MANUAL
If results are satisfactory, problem lies in sender unit.
If results are unsatisfactory, problem is with wiring or
gauge.
5.
Disconnect sender wire at sender terminal on gauge,
Fig. 27.
6.
Connect one lead of Fastestor to gauge sender
terminal and the other lead to a good ground.
Repeat steps 3 and 4.
If results are satisfactory,
problem lies in wire to sender unit.
NOTE:
A standard test light may be used to check
wire continuity.
7.
Replace components where necessary.
NOTE:
When the key switch is turned off, the pointer
will not necessarily return to the lowest value.
This is
inherent in the instrument and does not indicate a
faulty part.
579