TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 242 of 694

TM 5-3895-372-20

ADMIX SYSTEMS

6-16. LIQUID ADMIX TANKS MAINTENANCE (LOW-FLOW) (Continued).

LOCATION/ITEM

ACTION

REMARKS

A. REMOVAL (Continued).

1.

Swivel nut (2).

Disconnect.

2.

Hose fitting (9).

Remove. Remove hose (1)

from vehicle.

3.

Swivel nut (7).

Disconnect.

4.

Swivel nut (15).

Disconnect.

5.

Strainer (10).

Remove.

6.

Lower plumbing (14).

Revolve counterclockwise

until parallel with tank.

7.

Four bolts (13) and

Remove two straps (6) and

locknuts (12).

mounting pads (17).

8.

Tank (16).

Remove.

9.

Air gage and regulator

Remove at nipple (5).

(8).

10.

Filler cap (4).

Remove.

11.

Air valve and plumb-

Remove at nipple (3).

ing components.

12.

Lower plumbing (14).

Remove at nipple (11).

B. INSTALLATION.

NOTE

Use liquid teflon on all threaded joints at assembly.

13.

Valve and lower

Install at nipple (11).

Plumbing should face the rear

plumbing (14).

and parallel with tank.

Change 1

6-48