TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 424 of 694
TM 5-3895-372-20
MIXER-AUGER SYSTEM.
9-8. WEAR BLADES REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL
Do not damage rubber trough bottom when removing nuts.
NOTE
This procedure covers removal and replacement of one of each of the three different blade configurations.
Follow the same procedure for any quantity to be replaced. The legend contains the total quantities per
auger assembly. For replacement of all wear blades, use kit NS 3427001 (50663).
1.
Two socket bolts (1)
Unscrew and remove paddle
It may be necessary to chisel
and locknuts (3).
wear blade (2).
off.
2.
Two socket bolts (1)
Unscrew and remove seg-
It may be necessary to chisel
and locknuts (3).
mented wear blade (4).
off.
3.
Three socket bolts (1)
Unscrew and remove wear
It may be necessary to chisel
and locknuts (3).
blade (5).
off.
9-7
Back to Top
