TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 85 of 694
TM 5-3895-372-20
POWER TRAIN.
4-12. MAIN SHAFT MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
C.
CLEANING AND INSPECTION
18.
All parts.
Clean in SD-2 dry cleaning
solvent.
19.
Bearings.
Inspect for:
a.
Wear.
b.
Cracks.
c.
Breaks.
d.
Deformities.
e.
Smooth operation.
20.
Sheaves, retainers,
Inspect for:
bushings and shaft.
a.
Wear.
b.
Cracks.
c.
Breaks.
d.
Bends.
e. Deformities.
D.
ASSEMBLY
NOTE
A light coat of oil, applied to the shaft and mating surface of component parts, will aid in the reassembly.
21.
Bearing (6) and Install.
Tap on gently, using soft
retainer (9).
headed hammer.
22.
Retainer (9).
Aline with punch marks.
23.
Setscrew (8).
Tighten.
24.
Bushing (11) and
Install.
woodruff key (15).
25. Bushing (11). Aline with punch marks. Tap on gently, using soft
headed hammer.
26.
Sheave (10).
Install.
27.
Hex bolts (5) and
Tighten bolts evenly.
washers (7).
28. Retainer (14) and Install.
bearing (12).
29.
Retainer ring (14).
Aline with punch marks.
30.
Setscrew (13).
Tighten.
4-36
Back to Top
