TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 77 of 694
TM 5-3895-372-20
POWER TRAIN.
4-11. PTO BELTS MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL (Continued
)
5.
Cover (8).
Remove.
6.
Six hex bolts (14).
Remove.
7.
Access covers (13).
Remove.
8.
Lockwire (10).
Cut and remove.
9.
Setscrew (9).
Loosen.
10.
Upper yoke assembly (6).
Remove.
Tap off with hammer.
11.
Four hex nuts (12), lock-
Remove.
washers (11), and
bottom plate (24).
12.
Four hex bolts (30) and
Remove.
and flat washers (29).
13
Two hex locknuts (26).
Loosen.
14.
Adjusting screws (27).
Loosen evenly.
15.
Lockwire (22).
Cut and remove.
16.
Setscrew (23).
Loosen.
17.
Lower yoke assembly (19).
Remove.
Tap off with hammer.
18.
Four hex nuts (15)
Remove.
and lockwashers (16).
19.
Four hex bolts (20)
Remove.
and flat washers (21).
20.
Two lower bearing assem-
Remove.
blies (17) and plate (18).
21.
Two upper bearing assem-
Remove.
blies (25) and bottom
plate (24).
22.
V-beits (28).
Remove and discard.
B.
INSTALLATION.
23.
Two upper bearing assem-
Set in place.
blies (25) and plate (24).
4-28
Back to Top
