TM-5-3990-263-13-P
PALLET, ADAPTER, BRIDGE, M15
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
APRIL 2012
TM-5-3990-263-13-P - Page 471 of 728
FIELD MAINTENANCE
WINCH ASSEMBLY REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Pan, Drain, 5-Gallon (WP
0078, Table 2, Item 1)
Lifting Device, Minimum Capacity 350 lb (158.9 kg)
Tool Kit, General Mechanics: Automotive
(WP
0078, Table 2, Item 2)
Materials/Parts
Cap and Plug Set (WP
0081, Table 1, Item 4)
Gloves, Protective (WP
0081, Table 1, Item 8)
Goggles, Safety (WP
0081, Table 1, Item 9)
Lubricating Oil (WP
0081, Table 1, Item 17, 18, 19,
20)
Rag (WP
0081, Table 1, Item 21)
Packing, Preformed
(WP
0082, Table 1, Item 17) Qty:
2
Cotter Pin (WP
0082, Table 1, Item 34) Qty:
4
Lockwasher (WP
0082, Table 1, Item 44) Qty:
8
Lockwasher (WP
0082, Table 1, Item 46) Qty:
4
Personnel Required
(2)
References
Parts Manual (WP
0073, Figure 12)
Parts Manual (WP
0073, Figure 14)
Parts Manual (WP
0073, Figure 15)
Parts Manual (WP
0073, Figure 16)
Parts Manual (WP
0073, Figure 17)
Parts Manual (WP
0073, Figure 19)
WP
0057
WP
0038
Equipment Condition
Load removed from the BAP. (WP
0008)
BAP unloaded from the CBT. (WP
0006)
REMOVAL
WARNING
If winch cable has to be cut to remove winch assembly, wrap cut end of cable in tape and
secure loose end of cable to prevent it from swinging free during winch assembly removal.
Failure to comply may result in serious injury or death to personnel.
WARNING
The winch assembly without cable installed weighs approximately 350 pounds (158.9 kg).
Winch must be secured by a suitable lifting device before removing or installing mounting
hardware. Failure to comply may result in serious injury or death to personnel.
CAUTION
To prevent contamination of hydraulic system, cap and/or plug hydraulic lines and ports after
disconnecting lines.
TM 5-3990-263-13&P
0058
0058-1
Back to Top
