TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 483 of 728

FIELD MAINTENANCE

WINCH MOTOR ASSEMBLY REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Pan, Drain, 5-Gallon (WP

0078, Table 2, Item 1)

Tool Kit, General Mechanics: Automotive

(WP

0078, Table 2, Item 2)

Materials/Parts

Grease

(WP

0081, Table 1, Item 10, 11, 12, 13, 14)

Rag (WP

0081, Table 1, Item 21)

Packing, Preformed

(WP

0082, Table 1, Item 17) Qty:

2

Seal, Plain (WP

0082, Table 1, Item 12) Qty:

1

Lockwasher (WP

0082, Table 1, Item 47) Qty:

2

Materials/Parts (cont.)

O-ring (WP

0082, Table 1, Item 10) Qty:

1

O-ring (WP

0082, Table 1, Item 23) Qty:

1

References

Parts Manual (WP

0073, Figure 14)

Parts Manual (WP

0073, Figure 16)

Parts Manual (WP

0073, Figure 17)

Equipment Condition

Load removed from the BAP. (WP

0008)

BAP unloaded from the CBT. (WP

0006)

REMOVAL

NOTE

Use a drain pan to catch fluid draining from hoses and fittings. Wipe up any spillage with a

rag. Handle, store, and dispose of drained fluids in accordance with local policies and

procedures.

1.

Loosen both ends of two tubes (Figure 1, Items 1 and 2) on two elbows (Figure 1, Items 3 and 4). Loosen two

captive nuts (Figure 1, Items 5 and 6) and remove elbows (Figure 1, Items 3 and 4) and two preformed packings

(Figure 1, Items 7 and 8) from winch hydraulic motor (Figure 1, Item 9). Discard preformed packings.

TM 5-3990-263-13&P

0059

0059-1