TM-5-4210-249-13-P-2

TACTICAL FIRE FIGHTING TRUCK (TFF) MODEL M1142

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT REPAIR PARTS AND SPECIAL TOOLS); PART 2 OF 4

TM-5-4210-249-13-P-2 - Page 1109 of 1452

TM 5-4210-249-13&P-2

0225-3

DRAFT

0225

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

NOTE

•

Install cable ties as required.

•

Apply electrical sealant to all battery cable connections after installing cables.

1.

Install negative battery cable (3) on ground stud (18) with lockwasher (17) and nut (16).

2.

Route negative battery cable (3) to starter motor.

3.

Install two positive battery cables (11) and (7) on battery stud (15) with lockwasher (14) and nut (13).

4.

Install positive battery cable (7) to starter motor pass-through stud (8).

5.

Install positive battery cable (11) on preheat control box (12) with lockwasher (10) and nut (9).

6.

Install positive battery cable (7) on pass-through stud (8) with lockwasher (6) and nut (5).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

WARNING

ICON 30, 44, 27