TM 5-4210-249-13&P-2
0228-1
DRAFT
0228
FIELD LEVEL MAINTENANCE
WATER PUMP ENGINE EXHAUST PIPES REPLACEMENT
INITIAL SETUP:
REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Exhaust pipe and muffler can become very hot during vehicle operation.
Be careful
not to touch these parts with bare hands, or allow body to come in contact with pipe
or muffler.
Exhaust system parts can become hot enough to cause serious burns.
Failure to comply may result in damage to equipment or injury to personnel.
NOTE
•
Note routing of exhaust pipes and position of connections prior to removal to ensure
proper installation.
•
Remove exhaust pipe as one piece and disassemble sections after removal.
1.
Remove elbow (1) from reducer (2).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT00776
WARNING
ICON 13
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Lockwire (WP 0625, Item 31)
Locknut (6)
References
WP 0615, Fig. 11
Equipment Conditions
Pump house panels G, H, and I
removed (WP 0540)
Pump operator’s panel housing
opened (WP 0325)
Water pump engine muffler removed (WP 0241)
Water pump engine noise panel
removed (WP 0242)