TM 5-5420-202-10
0048
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
c. Ensure manual control lever on round
escape hatch is in full closed
(counterclockwise) position, or manual
control lever on oval escape hatch
is in full closed (clockwise) position.
NOTE
Location of M48A5 and M60A1
f re extinguishers are different.
M60A1 f re extinguisher
locations are shown.
6
Before
Fire
Extinguisher
System
Figure 5.
Fire Extinguisher Handle Seal.
a. Ensure internal f re extinguisher handle seal
is not broken or missing.
Seal on handle
broken or missing.
Figure 6.
Internal Fire Extinguisher Cylinders.
b. Ensure three internal f re extinguisher
cylinders (M60A1) and two f re extinguisher
cylinders (M48A5) are installed.
Cylinder missing.
0048-7
Table 1.
PMCS - Continued.