TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 277 of 535
TM 5-5420-202-10
0048
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
NOTE
Do not allow brake pedal
pressure to go over 900 psi
(6205 kPa). Brake may become
diff cult to release.
8
Before
Hydraulic Brake
System
Figure 9.
Brake Pedal.
a. Press brake pedal once until pressure gauge
indicates 750 to 900 psi
(5171 to 6205 kPa). Hold pedal in position
for 30 seconds.
750 psi (5171 kPa)
cannot be
obtained.
0048-9
Table 1.
PMCS - Continued.
Back to Top
