TM 5-5420-202-10
0057
19.Pass rope (Figure 6, Item 2) under and around outer surface of drive sprocket (Figure 6, Item 1) two times.
20.Pull free end of rope (Figure 6, Item 2) and hold.
21.Remove wood blocks from opposite side.
22.Start engine, warm up, and let idle. Refer to WP 0015.
23.Hold brake. Move shift lever to L (Low). Refer to WP 0013.
24.Steer vehicle slightly away from track. Refer to WP 0014.
25.Slowly release brake.
26.Hold rope (Figure 6, Item 2) at free end while driver accelerates engine until drive sprocket (Figure 6, Item 1)
turns slowly.
Figure 6.
Pulling Track Using Rope.
0057-5
INSTALLATION - CONTINUED