TM 5-5420-202-10
0056
NOTE
If vehicle is equipped with f ve support rollers, perform steps 7 and 8. If vehicle is equipped
with less than f ve support rollers, proceed to step 9.
7. Place 2 inch x 4 ft wooden block (Figure 2, Item 6) between center support roller (Figure 2, Item 5) and
track (Figure 2, Item 2).
8. Position twine (Figure 2, Item 1) with centerguides (Figure 2, Item 4) on both ends over end connectors
(Figure 2, Item 3) over center and front support rollers (Figure 2, Item 5). Position twine in center of end
connector. Record measurement between arrows.
Figure 2.
Wooden Block Placement.
0056-3
ADJUSTMENT - CONTINUED