TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 384 of 535
0057
TM 5-5420-202-10
27.Guide free end of track (Figure 7, Item 1) onto drive sprocket (Figure 7, Item 2).
28.Stop forward movement of vehicle when three end connectors (Figure 7, Item 3) are on drive sprocket
(Figure 7, Item 2).
29.Repeat steps 5 through 8.
Figure 7.
Guiding Track onto Drive Sprocket.
30.Remove rope (Figure 8, Item 1) from around sprocket (Figure 8, Item 3) and support rollers (Figure 8, Item 2).
31.Pass rope (Figure 8, Item 1) over sprocket (Figure 8, Item 3), support rollers (Figure 8, Item 2), and
compensating idler wheel (Figure 8, Item 5). Pull track (Figure 8, Item 4) and hold rope (Figure 8, Item 1) tight.
32.Start engine, warm up, and let idle. Refer to WP 0015.
33.Step on brake and move shift lever to L (Low). Refer to WP 0013.
34.Slowly release brake. Refer to WP 0012.
Figure 8.
Releasing Brake.
0057-6
INSTALLATION - CONTINUED
Back to Top
