0066
TM 5-5420-202-10
REMOVAL
Headlight and Blackout Marker Lamp
1. Use 6 inch f at-tipped screwdriver to remove four screws (Figure 1, Item 2) and lockwashers (Figure 1, Item 3)
from cover (Figure 1, Item 1). Discard lockwashers.
Figure 1.
Headlight Cover Screw Removal.
2.
Remove cover (Figure 2, Item 3) and seal (Figure 2, Item 2) by pulling straight from body (Figure 2,
Item 1) to avoid damaging guide pin (Figure 2, Item 4).
Figure 2. Headlight Cover and Seal Removal.
0066-2