TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 437 of 535
TM 5-5420-202-10
0066
7. Use 8 inch cross-tipped screwdriver to install two retainers (Figure 12, Item 5) over lens (Figure 12,
Item 8 and Item 9).
8. Use 8 inch cross-tipped screwdriver to install six screws (Figure 12, Item 7) and washers (Figure 12, Item 6) in
retainers (Figure 12, Item 5).
Figure 12.
Headlamp Lens and Retainer Installation.
9. Inspect cover seal (Figure 13, Item 2) for cuts or damage. Notify f eld maintenance if replacement is required.
Install seal on cover (Figure 13, Item 3).
10.Align cover (Figure 13, Item 3) with guide pin (Figure 13, Item 4) and install cover on body (Figure 13, Item 1).
Figure 13.
Headlight Cover and Seal Installation.
0066-9
INSTALLATION - CONTINUED
Headlight and Blackout Marker Lamp - Continued
Back to Top
