TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 435 of 535
TM 5-5420-202-10
0066
INSTALLATION
Headlight and Blackout Marker Lamp
1. Inspect seals (Figure 9, Item 2) for cuts or damage. Notify f eld maintenance if replacement is required. Align
notches on seals and lamps (Figure 9, Item 1) and install two seals on two new lamps.
Figure 9.
Headlamp Seal Inspection.
NOTE
Ensure sealed beam is positioned with the word FOG at bottom.
2. Connect lamps (Figure 10, Item 3) to electrical connectors (Figure 10, Item 2) and install lamps in body
(Figure 10, Item 1) aligning notches in gaskets (Figure 10, Item 4) with slots in body.
Figure 10. Headlamp Installation.
0066-7
Back to Top
