TM-5-5420-202-10

LAUNCHER, M48A5 TANK CHASSIS

OPERATOR'S MANUAL

DECEMBER 2009

  TM-5-5420-202-10 - Page 436 of 535

0066
TM 5-5420-202-10
NOTE
Ensure red lens is installed in the outside position.
3. Install ref ector (Figure 11, Item 1) in body (Figure 11, Item 4).
4. Install new blackout drive lamp (Figure 11, Item 2) and blackout marker lamp (Figure 11, Item 3) in body
(Figure 11, Item 4) by pressing in and turning clockwise.
Figure 11.
Blackout Drive Lamp and Blackout Marker Lamp Installation.
NOTE
Use soft cloth to clean lens (Figure 12, Item 8 and Item 9) and glass.
5. Install two seals (Figure 12, Item 1) around clear and red lenses (Figure 12, Item 8 and Item 9). Ensure
notches of seals are pointing to inside.
6. Install headlight lens (Figure 12, Item 8 and Item 9) and seals (Figure 12, Item 1) over lamps (Figure 12,
Item 3 and Item 4) in notches of body (Figure 12, Item 2) with rounded sides outward.
0066-8
INSTALLATION - CONTINUED
Headlight and Blackout Marker Lamp - Continued


Back to Top