TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 296 of 734

AIR CLEANER (ARMORED) CENTRIFUGAL FAN POWER LEAD REPLACEMENT (Sheet 3 of 3)

2.

3.

4.

5.

6.

7.

8.

9.

10.

adapter.

Install lead (C) through adapter (H). Pull

approximately 10 inches of lead out of

Install shell (J) approximately 2 inches over

end of lead (C) and install washer (K).

Pull shell (J) toward end until it is stopped

by washer (K).

Push gasket (G) and washers (E) and (F)

into adapter (H).

Thread nut (D) onto adapter (H). Use slip

joint pliers and tighten nut.

Install air cleaner centrifugal fan

cover (page 7-105).

Connect electrical connectors (L).

Check operation of air cleaner

(TM 5-5420-202-10).

Close top grille doors (TM 5-5420-202-10).

End of Task

INSTALLATION:

1.

TM 5-5420-202-20-2

Connect two leads (A) and (B) to centrifugal

fan circuit breakers and position the

following parts on lead (C): nut (D), washers

(E) and (F), gasket (G).

7-79