TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 302 of 734

TM 5-5420-202-20-2

AIR CLEANER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 3)

1.

2.

3.

4.

5.

6.

7.

8.

Pull pin (A) and release quick release

clamp (B).

Remove quick release clamp (B) from

hose and elbow.

Using socket, loosen nut (C) securing

clamp (D).

Remove hose assembly (E).

Remove clamp (D).

Cover air cleaner outlet elbow and turbosupercharger inlet elbow with rags to prevent

entrance of foreign matter.

Inspect hose assembly (E) for damage or defective parts.

Replace hose assembly if hose or

flange is unserviceable.

If hose (F) is serviceable, remove preformed

packings (G) from ends of hose assembly

flanges. Throw packings away. Using knife,

clean old adhesive from grooves in flanges.

INSTALLATION:

NOTE

If installing new hose assembly, skip steps 1 and 2.

1.

2.

Apply adhesive (Item 4, Appendix D) to

grooves in flanges in hose (A).

Install new preformed packings (B) into

grooves in flanges.

Go on to Sheet 3

Change 1

7-85