TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 304 of 734

TOOLS: 7/16 in. combination box and open end wrench

Slip joint pliers

REFERENCE:

TM 5-5420-202-10

NOTE

Replacement of restriction indicator is the same for

all air cleaners. Armored air cleaner is shown.

AIR CLEANER RESTRICTION INDICATOR (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1)

REMOVAL:

1. Using wrench, remove restriction

indicator (A).

2.

Remove plug (B) from side of guard (C) and

thread plug into threaded hole where restriction

indicator was.

TM 5-5420-202-20-2

3.

Using pliers, open hooks (D) and replace hooks (D), chain (E), or plug (B), as necessary.

INSTALLATION:

1.

Remove plug (B) from restriction indicator mounting hole.

2.

Install restriction indicator (A). Using wrench, tighten restriction indicator.

3.

Thread plug (B) into threaded hole on side of guard (C).

4.

Check indicator for operation (TM 5-5420-202-10).

End of Task

7-87