TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 299 of 734

TM 5-5420-202-20-2

AIR CLEANER (ALUMINUM) CENTRIFUGAL FAN POWER LEAD REPLACEMENT (Sheet 3 of 4)

INSTALLATION:

1.

Push shell (A) back away from contact (B).

2.

Remove washer (C) from lead (D). Remove

shell (A).

3.

Install the following parts onto lead (D):

nut (E), washer (F), washer (G), and new

gasket (H).

4.

Install lead (D) through adapter (J). Pull

approximately 10 inches of lead out of adapter.

5.

Install shell (A) over end of lead and install

washer (C).

6.

Pull shell (A) toward end until it is stopped

by washer.

7.

Push gasket (H) and washers (G and F) down

in adapter (J).

8.

Thread nut (E) onto adapter (J). Using pliers,

tighten nut.

9.

Install centrifugal fan (page 7-122).

Go on to Sheet 4

7-82