TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 326 of 734

TOOLS: 1/2 in. socket with 1/2 in. drive

Flat-tip screwdriver

Ratchet with 1/2 in. drive

SUPPLIES:

Silicone compound (Item 32, Appendix D)

NOTE

Removal of left or right centrifugal

fan hose is the same. Left side

shown.

REMOVAL:

1.

2.

3.

4.

5.

Using socket, remove 10 screws (A) and

lockwashers (B) securing cover (C).

Using flat-tip screwdriver, loosen clamps (D).

Slide clamps (D) onto hose (E).

Remove hose (E) from centrifugal fan (F)

and housing (G).

Inspect hose (E) and clamps (D). Replace

as necessary.

INSTALLATION:

1.

Position clamps (D) onto hose (E).

2.

Coat inside diameter of hose ends with

silicone compound and install hose (E)

to centrifugal fan (F) and housing (G).

TM 5-5420-202-20-2

AIR CLEANER (ARMORED) CENTRIFUGAL FAN HOSE REPLACEMENT (Sheet 1 of 1)

3.

Slide clamps (D) to ends of hose.

Use flat-tip screwdriver and tighten clamps (D).

4.

Install cover (C) and secure with 10 screws (A) and lockwashers (B).

5.

Using socket, tighten screws (A).

End of Task

7-109