TM 5-5420-202-20-2
ENGINE COOLING FAN REPLACEMENT (Sheet 2 of 4)
NOTE
Both engine cooling fans are replaced the same.
REMOVAL:
1.
Using 9/16 inch socket, remove four screws and Iockwashers (A) holding fan cover (B)
to engine.
2.
Remove fan cover (B).
3.
Using slip joint pliers remove cotter pin (C).
4.
5.
Using 1-1/4 inch socket, remove hex
nut and flat washer (D) holding fan to
shaft (E).
Remove assembled fan and hub (D) from
shaft (E).
Go on to Sheet 3
9-56