TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 714 of 734

TM 5-5420-202-20-2

COOLING FAN SHROUD REPLACEMENT (Sheet 7 of 8)

10.

11.

Position two pieces of fan housing (J) onto powerplant.

Using two 9/16 inch wrenches, install two screws, washers, and nuts (K) securing two

pieces of fan housing (J) together.

12.

Using 9/16 inch socket, install four screws and washers (L) securing fan housing (J) to

fan shroud (A).

13.

Using hands, position two fans (M) onto engine.

14.

Using 1-1/4 inch socket, install on each fan

washer (N) and nut (P) securing fans (M) to

engine.

15.

Using 1-1/4 inch socket and torque wrench,

tighten nuts (P) to 50-55 lb-ft (68-75 NŽm).

16.

Back nuts (P) off until slot in nut (P) alines

with hole in shaft. Using pliers, install

cotter pins (Q).

Go on to Sheet 8

9-53