TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 706 of 734

TM 5-5420-202-20-2

TURBOCHARGER SHROUDS REPLACEMENT (Sheet 4 of 5)

Outer Shroud Replacement (Sheet 1 of 1)

TOOLS:

1/2 in. combination box and open end wrench

1/2 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-2)

REMOVAL:

NOTE

Procedures for replacement of the left or right

transmission shrouds are similar. Procedures

for the left side are shown.

INSTALLATION:

1.

Using 1/2 inch socket, remove

screw and lockwasher (A).

2.

Using 1/2 inch socket and 1/2

inch wrench, remove three screws,

lockwashers, and nuts (B) securing

outer shroud (C).

3.

Remove outer shroud (C).

1.

2.

3.

4.

5.

Position outer shroud (C) to turbocharger.

Install three screws, lockwashers, and nuts (-B) to secure outer shroud (C) to turbocharger.

Install screw and washer (A) to secure outer shroud (C) to turbocharger.

Using 1/2 inch socket and 1/2 inch wrench, tighten screws (A and B).

Install powerplant (page 5-14).

End of Task

9-45