TM 5-5420-202-20-2
ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 2 of 5)
3.
Using screwdriver, remove two screws and lockwashers (D) hidden under seal, holding
retainers (E) to engine shroud right and left side.
4.
Remove retainers (E) from shroud.
5.
Displace seals (B) from shroud right
and left sides.
6.
Using screwdriver, lift front seal (F) and remove two screws and lockwashers
(G) holding retainer (H).
7.
Remove retainer (H) from shroud.
8.
Remove seal (F) from shroud.
Go on to Sheet 3
9-35