TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 693 of 734

TM 5-5420-202-20-2

ENGINE SHROUD REPAIR OFF ENGINE (Sheet 1 of 2)

TOOLS:

Putty knife

Ratchet with 1/2 in. drive

7/16 in. socket with 1/2 in. drive

SUPPLIES:

Dry cleaning solvent (Item 55, Appendix D)

Rags (Item 65, Appendix D)

Gloves (Item 69, Appendix D)

Adhesive (Item 4, Appendix D)

Goggles (Item 70, Appendix D)

Insulation

PRELIMINARY PROCEDURES:

Remove engine shroud (page 9-30).

DISASSEMBLY:

1.

2.

3.

4.

5.

Using

socket,

remove

six

screws (A), lockwashers (B),

and flat washers (C) securing

retainer (D) to engine shroud

(E) both sides.

Using socket, remove

six screws (F), lockwashers

(G), and flat washers

(H) securing retainer

(J) to engine shroud

(E) both sides.

Remove retainers

(D) and (J).

Using putty knife,

remove insulation

(K) and (L) from both

sides of engine shroud

(E).

Using dry cleaning

solvent and rags, clean

areas where insulation

(K) and (L) were removed.

Go on to Sheet 2

9-32