TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 695 of 734

TM 5-5420-202-20-2

ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURE

PAGE

Disassembly

9-34

Assembly

9-36

TOOLS:

Ratchet with 1/2 in. drive

7/16 in. socket with 1/2 in. drive

9/16 in. socket with 1/2 in. drive

2 in. extension with 1/2 in. drive

Putty knife

Cross-tip screwdriver

SUPPLIES:

Adhesive (Item 4, Appendix D)

Gloves (Item 69, Appendix D)

Dry cleaning solvent (Item 55, Appendix D)

Goggles (Item 70, Appendix D)

Rags (Item 65, Appendix D)

PRELIMINARY PROCEDURES:

Remove

Remove

DISASSEMBLY:

top deck assembly (page 16-21)

transmission shroud (page 9-2).

1.

Using 7/16 inch socket, remove ten screws, washers and lockwashers (A) holding four

seal (B) retainers (C) to engine shroud both right and left side.

2.

Remove retainers (C) from shroud.

Go on to Sheet 2

9-34