TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 708 of 734

TM 5-5420-202-20-2

COOLING FAN SHROUD REPLACEMENT (Sheet 1 of 8)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

9-47

Installation

9-51

TOOLS:

9/16 in. combination box and open end wrench (2 required)

Slip joint pliers

9/16 in. socket with 1/2 in. drive

1/2 in. socket with 1/2 in. drive

3 in. extension with 1/2 in. drive

Ratchet with 1/2 in. drive

Thickness gage (feeler gage)

1-1/4 in. socket with 1/2 in. drive

1/2 in. combination box and open end wrench

Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 NŽm)

SUPPLIES:

Cotter pin

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-2).

Remove engine shroud (page 9-30).

Remove front and rear shroud supports (page 9-39).

Go on to Sheet 2

9-47