TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 710 of 734

TM 5-5420-202-20-2

COOLING FAN SHROUD Replacement (Sheet 3 of 8)

8.

Using pliers, remove cotter pins (J)

from nuts (K) from each fan (L).

9.

Using 1-1/4

and washer

to engine.

inch socket, remove nut

(K) securing each fan (L)

10.

Lift fans (L) from engine.

NOTE

Four nuts (N) are located under fan

shroud and hold fuel line clamps. When

nut (N) and screws (P) are removed,

clamps will remain on fuel line.

11.

Using 1/2 inch socket, remove three

screws (M).

12.

Using 1/2 inch wrench to hold nuts (N),

use 1/2 inch socket and remove four

screws (P) and nuts (N).

13.

Using 1/2 inch socket, remove five screws

(Q) securing shroud (D) to engine.

Go on to Sheet 4

9-49